61 lines
2.9 KiB
Plaintext
61 lines
2.9 KiB
Plaintext
|
|
British Version of the Telephone Black box - Non-BT approved !
|
|
==============================================================
|
|
The Circuit.
|
|
============
|
|
X-------|------S1------|-------Y
|
|
| |
|
|
|------D1------|
|
|
| |
|
|
|---D2----R1---|
|
|
| |
|
|
|------C1------|
|
|
S1 - SPST Toggle D1 - 50-200 volt diode (IN400x range)
|
|
D1 - Standard LED R1 - 6.1K Resistor (or combination)
|
|
C1 - 1uf Non polarised
|
|
Note: The two diodes are placed the opposite way to each other.
|
|
Modern telephones have four wires goinn to them. These are
|
|
normally coloured red, white, green and blue. The red and white
|
|
wires carry the actual line, the green prevents 'tinkling' and
|
|
the blue isn't used. Three of these wires (including the blue
|
|
and green) pass straight through the black box, untouched. The
|
|
remaining wire (either red or white - either will do) should
|
|
have the box circuit connected in series with it at points X & Y.
|
|
The Theory.
|
|
===========
|
|
When a phone is answered, approx 100 mA is drawn from the line
|
|
which tells the exchange that you have answered. However, only
|
|
about 80 mA is actually required to polarise the mike element,
|
|
so by limiting the current, you can talk to the caller whilst
|
|
their exchange thinks that the phone is still ringing (and
|
|
thus they are not charged).
|
|
The main current limiting is carried out by R1. 6.1K resistors
|
|
are hard to come by so that resistance may have to be made up
|
|
with a combination of one or more resistors.
|
|
All other components merely improve running: C1 ensures that
|
|
speech quality is unaffected and D2 is used to indicate that
|
|
the box is switched on.
|
|
The Practice.
|
|
=============
|
|
Wait for the incoming call to ring then switch the box on. The
|
|
LED (D2) should pulse with each ring. If it doesn't, reverse
|
|
the polarity of both D1 and D2. Lift the handset and the LED
|
|
should light continuosly - you may now talk to your caller
|
|
completely free of charge ! To commence charging halfway
|
|
through a conversation, switch the box off - you will hear a
|
|
click as the callers meter (in their exchange) starts turning.
|
|
Once you have started chaging, you cannot stop it even if you
|
|
turn the box back on.
|
|
The Snags.
|
|
==========
|
|
As well as being able to work from any normal telephone,
|
|
the box will work when the caller phones from a Cardphone or
|
|
old style payphone, however new style coin payphones do not
|
|
cut in the microphone until the called party answers.
|
|
On trunk or international calls, the call time is limited to
|
|
three minutes, as the exchange gives up after that time (as
|
|
it assumes no-one is in, and therfore needn't hold up the line).
|
|
---------------------------------------------------------------
|
|
Written March 1988 by K.S.Reach (C)1988 The Hackers Academy.
|
|
This article may be downloaded and put on any bulletin board
|
|
but all credits m |