Files
2021-04-15 13:31:59 -05:00

76 lines
3.9 KiB
Plaintext
Raw Permalink Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
FM-MIKE 88 - 110 MHZ
________
\ANT /
ÚÄÄÄÄÄÄ¿ \ ³ /
³ ³ \³ /
Q2 ÚÄÄÄÄÄÄÂÄÄÄÄÄÂÄÄÄïïïïïïïïÄ¿ ³ \/
C6 R8 ÃÙ ³C7 \³ L1 ³ ÀÄÄÄÙ
ÚÄ´ÃÄ/\/\/\/\ÄÂÄÄÅ¿NPN ÍØÍ ÍÍ\ÍÍC8 ³
³ ³ À>ÂÄÄÄÄÙR1 ³\| ³
³ ³ ÀÄ/\/\/\/\ÄÅÄÄÄÄÄÄÄÄÄ´ÃÄ´
³ ³ R10 ³ C9 ³
³ ÃÄÄÄ/\/\/\/\ÄÄÄÄÄ)ÄÄÄÄÄÄÄÂÄÄÄÄ´
³ ³ C10 ³ ³ ³
³ ³ ÚÄÄÄ´ÃÄÄÄÄ¿ ³ ³ ³
³ ÀÄÄÁ/\/\/\/\ÄÁÄÄÄ´ ³ ÄÄÄÁÄÄÄÄ
³ R9 ³ ³ ÄÄÄÄ B1
³ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ ÄÄÄÄÄÄÄÄ
À)ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ ³ ÄÄÂÄ
³ C1ÚÄÄ´ÃÄÄÂÄÄÄÄ)ÄÄÁÄÄÄÄÄÄÄ)ÄÂÄÄÄ´
³ ³ C2 ³ ³ ³ ³ ÍÍÏÍÍ
R2 ³ R1 ÃÄÄ´ÃÄÄÙ ³ ³ ³ ÍÍÍ
Ú/\/\/\/\´ Ú/\/\/\/\ÂÄÙ R7 ³ ³ ³ Í
ÀÂÄÄ´ÃÄÄÄ´ ³ ÚÄÄÄÅÄÄ/\/\/\/\ÄÄÄ)ÄÄÄÄÄÄÄÄÄÄÙ ³
R³ C3 ³ ³ ³ ³ ³ ³
e³ ÚÄÄÄÙ ³ ³ ³ R4 ³ ³
d³ ³Shield ³ ³ ÀÄÄ/\/\/\/\ÂÄÄÙ ³
ÚÁÄÄÄÁ¿ ³ ³ R3 ÃÙ Q1 ³
³ ³White ³ ÀÄÄ/\/\/\/\ÄÂÄÅ¿NPN R6 ³
³MIKE ÃÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄ´ÃÄÄ´ À>Â/\/\/\/\ÂÄÄÄÄ´
ÀÄÄÄÄÄÙ C4³ ÀÄÄÄ´ÃÄÄÄÙ ³
ÚÄ/\/\/\/\ÄÙ C5 ³
³ R5 ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
I.D. Val Quantity
R1 10 K ohm 1/4 Watt 1
R2,6,7,8 1 K ohm 1/4 Watt 4
R3 100 K ohm 1/4 Watt 1
R4 8.2 K ohm 1/4 Watt 1
R5,10 15 K ohm 1/4 Watt 2
R9 3.9 K ohm 1/4 Watt 1
R11 220 ohm 1
C1 100 uF 25V (electrolytic) 1
C2 470 pF 50V 1 (may not be needed)
C3,5 10 uF 25V 2
C4,9,10 .01 uF 50V (disc) 3
C6 1 uF 50V (electrolytic) 1
C7 5 pF (mica, zero temp) 1
C8 6 - 35 pF Trimmer cap 1
Q1,2 PN2222 (NPN High Beta) 2
M1 F.E.T. Cap Mike (Field Effect, capacitive. Radio shack elec.
or even 8 ohm speaker (with resistors) will work ok)
B1 9 V Transistor battery.
L1 ** 8 turns of number 16 guage buss (solid) wire around a number
8 wood screw.
ANT Wire attached to 2nd (or 3rd) coil of L1. (Soldered, and strain
relieved.) Length may be approx 6". For experimental purposes,
try this. 300,000,000 METERS
______________
operating frequency
If operating frequency is 109 Mhz (Mega, or million Hertz),
300,000,000 divided by 109,000,000 = 2.752 Meters
Take a wire 2.752 meters long, cut it in half, put one half
on the 2nd (or 3rd) coil, the other half on the - (ground)
side of the battery, and make the two 180 degrees apart.
Works great!